top of page

Display Modes

Explore the real time pressure, results, and session stats views

On startup the display will be in the real time pressure display mode. Switching modes is done using the arrow buttons. The modes are labeled below the button. Just click in the direction of the mode you want.

Real Time Pressure

The display will adjust accordingly to the number and type(s) of Senders you have in use to show the relevant information for that Sender. It can simultaneously display the following number of Senders:

  • 1 to 3 Pressure Senders

  • 1 Pump Sender

  • 1 to 2 Stream Senders


Real time view of 2 Pressure Senders - the 2nd with flow calc enabled


Any Sender can be used by itself or in combination with other types such as:

  • A Pump Sender and 1 or 2 Stream Senders to get suction, discharge, rpm and flow data from up to 8 hose streams.

  • A Pump Sender and 1 or 2 Pressure Senders (with flow calc enabled) to get suction, discharge, rpm and flow data from 2 large diameter outlets.

  • You can not use Pressure Senders and Stream Senders at the same time.


Real time view of Pump and Stream Sender


Results / records

The display will record relevant data from connected Senders for review later by clicking the Record button. It will only record when in the Real Time Pressure screen. What is recorded and shown is based on the number and type of Senders connected.

Results for 2 Pressure Senders - the 2nd with flow calc enabled


The following is the data that will be recorded for each Sender type and combination:

  • Pressure Sender: PSI for each Sender; if flow calc is enabled GPM will also be recorded

  • Pump Sender: suction PSI, discharge PSI & RPM

  • Stream Sender: total GPM for all connected streams

  • Pump / Stream Sender: suction, discharge, rpm & total GPM

  • Pump / Pressure Sender: suction, discharge, rpm & total GPM


Click the up arrow to view page 1 of your recorded results showing records 0 to 4. Click up again to view page 2 showing records 5 - 9. Each time you press up it will toggle between the pages.


Battery life / Session stats

The display will show battery life for itself and all connected Senders. Click the right arrow to view this screen.

Clicking right again will switch to the Session stats screen. Click right to toggle between the views.

Session stats are automatically tracked for each session. A session is from power on to power off or reset.


Menu system

See the next section for information on menu settings and configuration.

bottom of page